Horner-apg QX751 OCS Manuale Utente Scaricare il pdf (Pagina 31)

MAN0890-02-EN CH. 7

August 20, 2009 Page 31 of 96 ECN # 979

To select a different controller, click on the Device Type list box and scroll down to select the

desired controller. Then press OK. If satisfied with the controller now selected, press Base # tab

at the top of the screen. Then, go to Step 3.

Note: The Auto Config button can be pressed prior to selecting the desired controller. By

pressing the button, the settings are deleted from any controller that is physically connected to

the PC.

3. The following screen appears. In this configuration example, I/O modules are going to be

selected and configured for Base 2.

Figure 7.3 – Main Base Screen appears with QX751 and BP43

Upon pressing the Base 2 tab, the following screen appears.

Figure 7.4 – Base 2 Selected

ny Base can be

selected. It is not

necessary to select

bases in a specific

order.

The Main base

contains the slots

directly located on the

back of the QX751.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

Nessun commento

Horner-apg QX751 OCS Manuale Utente Pagina 31